Onboard video only has sporting value if it shows precisely what the car is doing. A telemetry overlay is therefore far more than a speed reading and a stopwatch: you need to choose the useful data, make it readable and keep a presentation worthy of the car and the team.
Badly placed information can hide the apex, and an over-smoothed speed trace can erase a hesitation under braking. An overloaded display also makes the footage unreadable. The overlay must be a reading tool, not a decorative element.
Start with the purpose of the video
Define what the footage is for before adjusting the display. A driver at a test day wants to compare braking points, minimum speeds and the consistency of their laps. The team focuses on the debrief: laps, sectors, throttle, brake and accelerations. For partners or social media, elegance and discretion come first.
Analysis footage can carry more data, provided it can still be read at a glance. Presentation footage is limited to speed, gear, lap time and the track map. The right configuration answers a precise question rather than showing as many figures as possible.
For private testing, create a dedicated overlay profile with reference elements kept from one session to the next, so you can compare videos without redoing the layout every time.
The data that deserves its place on screen
Speed alone tells you the result, not the method. Pair it with the gear engaged and the lap time for a simple reading.
Throttle and brake reveal far more about driving. Their transition shows excessive coasting, a late return to the throttle or an abrupt brake release. Steering wheel or steering angle data shows corrections that the image does not always reveal, especially in demanding cars, on fast circuits and in coaching.
G-forces give an idea of the intensity of cornering load or braking, but they do not explain the line. They are useful in a technical video, less so when presenting a historic car or a club day.
The GPS track map helps place the action on the lap. Keep it small and in a corner: a large map in the centre draws attention away from the track.
Engine data (revs, temperature, pressure) is best kept for setup work, reliability monitoring or driver-engineer exchanges. For most track videos, it overloads the image.
The five visible items rule
On a classic onboard view, display three to five blocks of information. Speed, gear, lap time, pedals and a small track map already make a very complete base.
To add one item, remove another. This discipline avoids the “simulator screen” effect pasted onto real footage.
How to set up a telemetry overlay that stays readable at speed
Place each element according to the camera framing. Watch a complete sequence to identify the stable areas and those often covered by the steering wheel, dashboard, hands, mirror or windscreen reflections.
The lower corners are generally safe for gauges. The top left corner can hold the lap time or the circuit name, without hiding the mirror. Keep the centre clear for braking points, kerbs, corner exits and neighbouring cars.
Choose a sober typeface with well-drawn numerals, as a thin font becomes blurred with vibration or strong light. Contrast is the priority. Avoid heavy borders, metallic effects and needless fluorescent colours.
Visual identity should stay discreet: a colour taken from the livery, a fine trim line, a team signature. Consistency with the race suit, the paddock luggage and the presentation in the pits matters more than ornament.
Synchronise your sources before judging the data
Synchronisation between video and telemetry determines the accuracy of the overlay. Half a second of offset under braking distorts the debrief. Use a kerb strike, a braking point or a gear change as common reference markers.
GPS accuracy depends on the hardware, satellite reception, the circuit and the antenna. For in-depth coaching work, favour a system designed for circuit recording rather than a consumer GPS.
RaceStreaming solutions fit into a recording approach designed for racing. You should nevertheless test your installation before an important session: power supply, onboard camera mounting, GPS reception, readability in full sunlight and file retrieval.
Do not correct the data to flatter the lap
Smoothing makes a curve cleaner but can mask a lock-up, a lift of the throttle or a steering correction. Light filtering is fine for publication, whereas performance analysis requires data close to raw.
Keep consistent units (km/h for a European audience), a stable scale across several videos and an unaltered G scale so as not to exaggerate a sequence artificially. Precision builds more credibility than visual effect.
Adapt the display to circuit racing, rallying and karting
On circuit, lap time, sectors and track map are truly valuable, and repeatable braking points make comparison easier. Create one template per car, as steering wheel position, camera height and cockpit brightness vary considerably.
In rallying, the overlay should favour speed, gear, stage time and possibly location. Too much information becomes hard to follow on a narrow road where the image is already very busy.
In karting, continuity of movement matters more than absolute speed. A readable lap time, a compact track map and throttle or brake data are enough. With a low, vibrating camera, enlarge the numerals slightly and avoid small circular gauges.
Validate the setup in real conditions
Do not judge the overlay on a computer screen, but on the device it will actually be viewed on: a tablet in the paddock, a phone, a screen shared with the coach or the pit monitor. Details visible on a monitor disappear on mobile.
Test after a full session, with low sun, shade, rain if possible and varied vibration. Check that the corner, the driver’s action and the timing reference can be identified within seconds. If not, simplify.
A well-configured overlay respects track time and becomes a tool for progress. The data must serve the driving, keep the track at the centre of the viewer’s gaze and extend your racing signature.
How to Set Up a Telemetry Overlay for Track Videos
Onboard video only has sporting value if it shows precisely what the car is doing. A telemetry overlay is therefore far more than a speed reading and a stopwatch: you need to choose the useful data, make it readable and keep a presentation worthy of the car and the team.
Badly placed information can hide the apex, and an over-smoothed speed trace can erase a hesitation under braking. An overloaded display also makes the footage unreadable. The overlay must be a reading tool, not a decorative element.
Start with the purpose of the video
Define what the footage is for before adjusting the display. A driver at a test day wants to compare braking points, minimum speeds and the consistency of their laps. The team focuses on the debrief: laps, sectors, throttle, brake and accelerations. For partners or social media, elegance and discretion come first.
Analysis footage can carry more data, provided it can still be read at a glance. Presentation footage is limited to speed, gear, lap time and the track map. The right configuration answers a precise question rather than showing as many figures as possible.
For private testing, create a dedicated overlay profile with reference elements kept from one session to the next, so you can compare videos without redoing the layout every time.
The data that deserves its place on screen
Speed alone tells you the result, not the method. Pair it with the gear engaged and the lap time for a simple reading.
Throttle and brake reveal far more about driving. Their transition shows excessive coasting, a late return to the throttle or an abrupt brake release. Steering wheel or steering angle data shows corrections that the image does not always reveal, especially in demanding cars, on fast circuits and in coaching.
G-forces give an idea of the intensity of cornering load or braking, but they do not explain the line. They are useful in a technical video, less so when presenting a historic car or a club day.
The GPS track map helps place the action on the lap. Keep it small and in a corner: a large map in the centre draws attention away from the track.
Engine data (revs, temperature, pressure) is best kept for setup work, reliability monitoring or driver-engineer exchanges. For most track videos, it overloads the image.
The five visible items rule
On a classic onboard view, display three to five blocks of information. Speed, gear, lap time, pedals and a small track map already make a very complete base.
To add one item, remove another. This discipline avoids the “simulator screen” effect pasted onto real footage.
How to set up a telemetry overlay that stays readable at speed
Place each element according to the camera framing. Watch a complete sequence to identify the stable areas and those often covered by the steering wheel, dashboard, hands, mirror or windscreen reflections.
The lower corners are generally safe for gauges. The top left corner can hold the lap time or the circuit name, without hiding the mirror. Keep the centre clear for braking points, kerbs, corner exits and neighbouring cars.
Choose a sober typeface with well-drawn numerals, as a thin font becomes blurred with vibration or strong light. Contrast is the priority. Avoid heavy borders, metallic effects and needless fluorescent colours.
Visual identity should stay discreet: a colour taken from the livery, a fine trim line, a team signature. Consistency with the race suit, the paddock luggage and the presentation in the pits matters more than ornament.
Synchronise your sources before judging the data
Synchronisation between video and telemetry determines the accuracy of the overlay. Half a second of offset under braking distorts the debrief. Use a kerb strike, a braking point or a gear change as common reference markers.
GPS accuracy depends on the hardware, satellite reception, the circuit and the antenna. For in-depth coaching work, favour a system designed for circuit recording rather than a consumer GPS.
RaceStreaming solutions fit into a recording approach designed for racing. You should nevertheless test your installation before an important session: power supply, onboard camera mounting, GPS reception, readability in full sunlight and file retrieval.
Do not correct the data to flatter the lap
Smoothing makes a curve cleaner but can mask a lock-up, a lift of the throttle or a steering correction. Light filtering is fine for publication, whereas performance analysis requires data close to raw.
Keep consistent units (km/h for a European audience), a stable scale across several videos and an unaltered G scale so as not to exaggerate a sequence artificially. Precision builds more credibility than visual effect.
Adapt the display to circuit racing, rallying and karting
On circuit, lap time, sectors and track map are truly valuable, and repeatable braking points make comparison easier. Create one template per car, as steering wheel position, camera height and cockpit brightness vary considerably.
In rallying, the overlay should favour speed, gear, stage time and possibly location. Too much information becomes hard to follow on a narrow road where the image is already very busy.
In karting, continuity of movement matters more than absolute speed. A readable lap time, a compact track map and throttle or brake data are enough. With a low, vibrating camera, enlarge the numerals slightly and avoid small circular gauges.
Validate the setup in real conditions
Do not judge the overlay on a computer screen, but on the device it will actually be viewed on: a tablet in the paddock, a phone, a screen shared with the coach or the pit monitor. Details visible on a monitor disappear on mobile.
Test after a full session, with low sun, shade, rain if possible and varied vibration. Check that the corner, the driver’s action and the timing reference can be identified within seconds. If not, simplify.
A well-configured overlay respects track time and becomes a tool for progress. The data must serve the driving, keep the track at the centre of the viewer’s gaze and extend your racing signature.