A car left standing on its tyres carries a concentrated load that can leave a lasting mark after a session, a journey or several weeks in storage. Flatstoppers support each tyre on a curved surface and limit the formation of tyre flat spots.
For the gentleman driver, comfort is also at stake: fewer vibrations through the steering wheel and a car prepared with care. Your equipment is a signature, and it still matters when the car stands still.
Why Use Flatstoppers to Prevent Flat Spots?
A tyre copes perfectly well with the weight of the car during a short stop. The risk appears with long periods of parking, tyres that are still hot or insufficient pressure: the result is a localised deformation known as a flat spot (a tire flat spot, as American drivers say).
Some flat spots are temporary and disappear after a few kilometres. Others persist, particularly on stiff carcasses, semi-slicks, competition slicks and older tyres. They show up as vibrations through the steering wheel and the seat, and can easily be mistaken for a wheel or suspension problem.
Flatstoppers spread the load thanks to their cradle-shaped profile. They suit a GT, a track day car, a rally car between two events, a historic vehicle or a race car alike.
In the paddock, a car may stand for several days under an awning, on a trailer or in a garage box, sometimes right after running very hot tyres. Place the supports only once the wheels and tyres have cooled down.
The Real Benefit: Consistency and Peace of Mind
The device is preventive. It will not turn a worn tyre into a new one, nor correct a carcass defect.
On a car with lightweight wheels, high-performance bearings and carefully set geometry, it spares you unnecessary diagnostics and premature replacements caused by an avoidable vibration.
Choosing the Right Flatstoppers for Your Car
Your choice should not rest on looks or on the number of supports. The contact width must match the tyre and the material must carry the weight. A city car, a GT and a race car each bring different constraints.
Check the width of your tyres and the diameter of your wheels. The support should take the tread without pressing on the tyre shoulders. For very wide tyres, a generous cradle is preferable: a cradle that is too narrow reduces the benefit.
The material must stay stable on the floor, resist crushing and leave no marks on the rubber. The right choice depends on use: seasonal storage in a workshop, occasional parking in a truck, or exposure to changes in temperature and humidity.
Before buying, consider the following criteria:
the total weight of the car, spread over four wheels;
the width and type of the tyres fitted;
how long the car usually stands still;
the type of floor: smooth, painted, concrete or the deck of a trailer.
On a car with low ground clearance, the thickness of the supports matters. It slightly raises the parked height, which rarely causes a problem. With a fragile front splitter or a ramp calculated to the millimetre, however, check the approach angle and the way you position the car.
Four Supports, or More?
For normal parking, four Flatstoppers, one per wheel, ensure an even load and avoid a height difference between the axles. Two supports are only a temporary solution.
On axle stands, the logic changes. Stands relieve the tyres, but they must be placed at the lifting points specified by the manufacturer or the car’s preparer. They are useful for a very long lay-up or for mechanical work, but they demand more time, space and care. Flatstoppers are often quicker when the car needs to stay ready to go.
How to Install Your Flatstoppers Correctly
Park the car on a stable, clean floor. Remove gravel, screws and metal swarf. Place each support in line with its wheel, hollow side towards the tyre.
Drive forward slowly until each wheel sits centred in its cradle. A helper outside the car is useful for a low car or when rear visibility is limited. Never accelerate to climb over the edge: this protects your splitter, diffuser and tyres. Then check visually that each wheel sits evenly.
Tyre pressure remains essential. Flatstoppers do not exempt you from the recommended storage pressures: too low, the pressure accentuates the deformation; too high and outside the recommendations, it is not suitable either. Refer to the owner’s manual, the tyre manufacturer or your team’s settings.
Avoid installing them straight after a session, with scorching tyres and high pressures. Let everything cool down, check the tyres visually, then position the car. This discipline matters all the more with slicks or very soft compounds.
Storage, Transport and Paddock: Good Habits Against Flat Spots
For storage lasting several weeks, make the supports part of a complete routine: clean the tyres of brake dust and rubber residue, and store the car in a dry place, away from direct sunlight and large temperature swings.
On a trailer or in a truck, the supports never replace approved tie-down straps. They are neither transport chocks nor safety devices.
In the paddock, they give your set-up a more polished look, in keeping with the standards you apply to an FIA race suit, a helmet or communication equipment. Racing With Elegance stands for this vision of the detail that truly counts.
Before returning to the track, inspect the tyres. If a vibration persists once the tyres are back up to temperature, do not automatically blame a flat spot: check the balancing, the condition of the rim, wheel nut torque, pressures, bearings and any carcass damage.
Flatstoppers are discreet, yet they preserve the pleasure of driving when the car sets off again without the slightest vibration.
Flatstoppers: Prevent Tyre Flat Spots in Storage
A car left standing on its tyres carries a concentrated load that can leave a lasting mark after a session, a journey or several weeks in storage. Flatstoppers support each tyre on a curved surface and limit the formation of tyre flat spots.
For the gentleman driver, comfort is also at stake: fewer vibrations through the steering wheel and a car prepared with care. Your equipment is a signature, and it still matters when the car stands still.
Why Use Flatstoppers to Prevent Flat Spots?
A tyre copes perfectly well with the weight of the car during a short stop. The risk appears with long periods of parking, tyres that are still hot or insufficient pressure: the result is a localised deformation known as a flat spot (a tire flat spot, as American drivers say).
Some flat spots are temporary and disappear after a few kilometres. Others persist, particularly on stiff carcasses, semi-slicks, competition slicks and older tyres. They show up as vibrations through the steering wheel and the seat, and can easily be mistaken for a wheel or suspension problem.
Flatstoppers spread the load thanks to their cradle-shaped profile. They suit a GT, a track day car, a rally car between two events, a historic vehicle or a race car alike.
In the paddock, a car may stand for several days under an awning, on a trailer or in a garage box, sometimes right after running very hot tyres. Place the supports only once the wheels and tyres have cooled down.
The Real Benefit: Consistency and Peace of Mind
The device is preventive. It will not turn a worn tyre into a new one, nor correct a carcass defect.
On a car with lightweight wheels, high-performance bearings and carefully set geometry, it spares you unnecessary diagnostics and premature replacements caused by an avoidable vibration.
Choosing the Right Flatstoppers for Your Car
Your choice should not rest on looks or on the number of supports. The contact width must match the tyre and the material must carry the weight. A city car, a GT and a race car each bring different constraints.
Check the width of your tyres and the diameter of your wheels. The support should take the tread without pressing on the tyre shoulders. For very wide tyres, a generous cradle is preferable: a cradle that is too narrow reduces the benefit.
The material must stay stable on the floor, resist crushing and leave no marks on the rubber. The right choice depends on use: seasonal storage in a workshop, occasional parking in a truck, or exposure to changes in temperature and humidity.
Before buying, consider the following criteria:
On a car with low ground clearance, the thickness of the supports matters. It slightly raises the parked height, which rarely causes a problem. With a fragile front splitter or a ramp calculated to the millimetre, however, check the approach angle and the way you position the car.
Four Supports, or More?
For normal parking, four Flatstoppers, one per wheel, ensure an even load and avoid a height difference between the axles. Two supports are only a temporary solution.
On axle stands, the logic changes. Stands relieve the tyres, but they must be placed at the lifting points specified by the manufacturer or the car’s preparer. They are useful for a very long lay-up or for mechanical work, but they demand more time, space and care. Flatstoppers are often quicker when the car needs to stay ready to go.
How to Install Your Flatstoppers Correctly
Park the car on a stable, clean floor. Remove gravel, screws and metal swarf. Place each support in line with its wheel, hollow side towards the tyre.
Drive forward slowly until each wheel sits centred in its cradle. A helper outside the car is useful for a low car or when rear visibility is limited. Never accelerate to climb over the edge: this protects your splitter, diffuser and tyres. Then check visually that each wheel sits evenly.
Tyre pressure remains essential. Flatstoppers do not exempt you from the recommended storage pressures: too low, the pressure accentuates the deformation; too high and outside the recommendations, it is not suitable either. Refer to the owner’s manual, the tyre manufacturer or your team’s settings.
Avoid installing them straight after a session, with scorching tyres and high pressures. Let everything cool down, check the tyres visually, then position the car. This discipline matters all the more with slicks or very soft compounds.
Storage, Transport and Paddock: Good Habits Against Flat Spots
For storage lasting several weeks, make the supports part of a complete routine: clean the tyres of brake dust and rubber residue, and store the car in a dry place, away from direct sunlight and large temperature swings.
On a trailer or in a truck, the supports never replace approved tie-down straps. They are neither transport chocks nor safety devices.
In the paddock, they give your set-up a more polished look, in keeping with the standards you apply to an FIA race suit, a helmet or communication equipment. Racing With Elegance stands for this vision of the detail that truly counts.
Before returning to the track, inspect the tyres. If a vibration persists once the tyres are back up to temperature, do not automatically blame a flat spot: check the balancing, the condition of the rim, wheel nut torque, pressures, bearings and any carcass damage.
Flatstoppers are discreet, yet they preserve the pleasure of driving when the car sets off again without the slightest vibration.